Post up your XJ

[lil_red_wagon]

Lets get it goin. Post up the pics of your xj and a list of mods.

 

[XXXJ]

hey wats up man, see you signed up

 

[lil_red_wagon]

ill start with mine

90 XJ Limited
4.0l, AW4 w/ TCU control box, NP231D w/ SYE
D30 non disco, 8.8 lsd, 4.10's
Eagle Alloys 15x10 wrapped in 36x12.5 Super Swamper TSL Bias
Custom 6" lift, RE lca's, BDS front springs, Bastard pack rear springs
W.O.R.P. Off Road front & rear bumpers, tire carrier, fuel & tc skids (not installed), crossover steering
Custom intake & exhaust, Ford 19lb injectors, Cobra 25LTD
Vented hood, removable doors, Open cooling system, im sure theres more just cant think of it right off

 

[lil_red_wagon]

yup sure did always on the look out for a new jeep site. glad i was able to get on one when it first started out like to see where and how far it goes.

 

[CodyB]

So far this is all I could find in my photobucket.
95 XJ Country, 3" Rough Country front coils and rear add a leaf, new shocks all around. Custom front bumper, rear custom double tube bumper, custom top rack. Stripped interior, due to excessive trips underwater... Freakin deep holes in the creek runs... Anyhow the few pics I have...

Those were from the axle rebuild I had to do due to leaky seals and something about a pond...

Bumper side view.

Warn M8000 winch, bulletproof and will even pull out a school bus no sweat.

 

[uplandhawaii]

Here's my old 92' XJ, at the time it was locked up running 31" TSL's with 4" RE lift and home built bumpers.

Then went to 33" TSL's and 7" mixed lift before I sold it.

 

[rguignard]

well heres mine

95 sport
3 in RC lift
4.0 auto
242 dana 30 and 35 welded
31s
homemade frt and rear bumpers and rock sliders

 

[audioguy1]

Well here it is. 97 XJ Country, 4'' springs 2'' pucks, bastard pack rear, AA SYE, front driveshaft in rear. chopped fenders, 33 12.50 Truxxus MT's, custom made sliders and front bumper (no pics yet), have lockers as well, just not installed yet. Many other mods just can't remember them all

Got bored one day and parked like this in the driveway on my girlfriend's YJ

 

[4xFun]

Some really cool pics guys! Keep 'em comin'.

 

[John Edwards]

XJ from the FLA

 

[charlie]

damn audioguy that looks almost identical to my first xj:

 

[audioguy1]

yeah it does, except yours looks to be quite a bit larger.

 

[Zembonez]

Here are three of my most recent XJs. Sorry, but all I have handy are driveway shots.

 

[Shaggy]

Nice xj's Jim. You still have them all?

 

[Zembonez]

Nice xj's Jim. You still have them all?

Nope. They have all gone on to other owners. I have a 2000 2Door that is going to be my next project. I want to take the back half off of the roof and do a cage interior... These are just from the last 3 years.

Unfortunately the last one looks like this now.

 

[kickitandholdit]

haha wow we had one with a 4" lift and all terrains. wish i could get another now that i see those haha

 

[Underpowered]

my current XJ.

1990 4.0 aw4 242 (with cracked case, getting a 231 next weekend), welded 29 spline 8.25 rear end, bastard pack with shackles for rear lift, 4.5" coils on stock arms up front (soon to change due to a bent LCA). 33x14.5-15 cut boggers out back, 33x10.5 swampers up front, no sway bars, hacked roof ( done by PO). bumpers, tailgate, and doors built by me.

 

[znissmo]

hello guys ..im new here! ..jk
i live in yuma az and right here its the capital of jeeps .... everybody here has XJ's , wranglers, comanches, ZJ, etc.... you can visit 104racingteam.com

ok too much blah blah here are some pics of my
jeep Xj 88 , 1998 I6 4.0L motor, Fox Shocks (not in the pic) , 373 gears, polished heads, manual trans., 2001 grille, 15X10 weld sidewiners wheels, 32's BF Goodrich Muds, etc...

and this is my old ZJ ... i sold it !

 

[lil_red_wagon]

hey znissmo did you just use the header panel or hood fenders and all?

 

[znissmo]

hey znissmo did you just use the header panel or hood fenders and all?

just the grille from a newer xj ,its not the exact size but make it fit i