mini chopper

SUPERD

New member
Joined
Mar 25, 2010
Messages
197
Reaction score
0
Location
Bentonville Arkansas
started on this last winter, it was long & cold and I got bored.
started with 30 ft. of .095 & .120 wall 1" tube.
plasma cut some triple trees & fork drop outs & rear axle mounts.
found a 144 spoke lowrider bicycle wheel on ebay, golf cart rim & turf tire from the local golf cart dealer.
traded some welding for the 60's mustang chopper tank.
comet torq-a-verter to give it the open primary look, bent up a 180 tube to move the carb to the front right side like a "big" chop. got a lil K&N cone filter off a pit bike for it
 

Attachments

  • frame in jig.jpg
    frame in jig.jpg
    86.3 KB · Views: 2
  • forks.jpg
    forks.jpg
    78.7 KB · Views: 2
  • tank.jpg
    tank.jpg
    79.3 KB · Views: 2
  • roller.jpg
    roller.jpg
    83.9 KB · Views: 4

SUPERD

New member
Joined
Mar 25, 2010
Messages
197
Reaction score
0
Location
Bentonville Arkansas
thats what I was shootin for, still got to trim the rear fender down a bit more, trying to get the foot pegs where i can sit comfortably
 

Attachments

  • intake.jpg
    intake.jpg
    52.3 KB · Views: 2
  • seat & fender.jpg
    seat & fender.jpg
    45 KB · Views: 6

Shaggy

Administrator
Staff member
Joined
Mar 13, 2010
Messages
643
Reaction score
0
Location
Arizona
You need to take a pic of you sitting on it to get the full mini effect :D
 

Members online

No members online now.
Top